"Increase the disc" brake kit in the past seem to have a lot of negative evaluation, including a high-speed jitter, coilover kits ukdifferent sound to the film and uneven wear and other issues, but these issues for research and development increased intentions HHC Brakes Disc Kit, it has long been not a problem, let us see how they are for many European performance convinced the owners are willing to choose to increase the disc brake kit to strengthen the performance of the car.

According to the head of HHC Brakes - Ho Chi Hung said that in the past would increase the problems mentioned above dish kit, the key reason is that the use of calipers seat is "dog-bone" or "original type calipers extended seat", the former is the use of a piece of iron blocks to the relocation of the original calipers seat to correspond to a larger diameter disc to increase, it is more cost-effective approach, but also because of the additional parts, so easy to make the ET value calipers seat run away, and to the film The friction area can not all eat the brake disc, will lead to different sound to the film and uneven wear occurs when the brakes; As the latter is entirely related to reference the original calipers seat specifications, including the ET value, the edge R angle and overall strength, then redesign an enlarged disc calipers extend special seat, so just use the original quality calipers seat as there is absolutely no need to worry about other problems follow. Because redesigned caliper extend seat, each car specifications are different, so the design and development time and time-consuming spirit, than simply using more laborious dog bones, hoping that these are the most important parts of car security quality, which is the brake system can meet the original specifications, and provide superior braking effect to the corresponding power level after the increase horsepower.

This post has been modified to increase the HHC Brakes discs VW Golf GTI MK7 solid loading, it is clear that the position of the disk is not particularly skewed to the left or to the right, on behalf of the left and right side to make fairly evenly holder force, braking effect was to play, vw passat turbocharger it will not issue a different sound, this is the need to carefully research and development in order to effect some modifications.

Virage's for quite impressed, race parts when the row is not a hand-made cars from the row, inexplicably ran a Sport Mode Shouzi Pai gearbox, the car industry 14 years ago, brought no small shock, the four-speed automatic can also freely Switching gears, seems like the power to move the reality is different, and there is the greatest force Fengyun engine factory 143hp and maximum torque and 17.0kgm can be said is the second strongest since Perak Malaysia-made cars, and therefore for the year Virage introduced modified product can be said to be very rich, a few years later because of the excellent cast iron body physique, plug-horsepower turbo-pressed version have also baked. This car is actually quite durable, maintenance Shouzi Pai speed does not need to use special oil, usually you can get automatic transmission oil, cast iron engine under normal maintenance if there is no need to worry about the backhoes, the direction of the owners also use the host machine 230,000 km of still alive, so the constitution is worthy of recognition.

Do not look at this car look very elegant, in fact, part of the engine has been replaced previous regulations 4G93T + five-speed manual transmission, at the owner's request even in the cold, the exhaust pipe has maintained the original 4G93T parts, 205hp power perhaps not original In particular exaggeration, but as a daily car use is already quite enough, plus purchase price of not more than 30 universal transplant such feedback, be considerable value.

Confucianism boss suggested linking the car, because the relationship between the age of the vehicle, the first is best to do plumbing replacement, if you can replace the tank can also be more complete, in addition to a 4G93 body because it is not in the timing chain design, we all know that rubber have a certain life span, so replace the product is inevitable. Chassis part is not a big problem, basically the same as the previous several cars, Toyota Corolla Coilovers wear certain joint parts more quickly, so the rubber and anti-roll bar bracket earners Lee signed fixed rubber recommend patrol once, if there is a crack can can called from materials to new materials and parts, the other one can be said MacPherson disadvantage is that the larger the force shock absorbers, can turn the steering wheel to see if there are opportunities to prop up the body, MacPherson suspension design devices and spring will follow rotate together, so the rubber material Shock tower is basic consumption goods, or over a pothole are noisy noise will make people think is leaking shock absorbers.

In that era 1992-1997, turbocharger uk 2.0 liters of vehicle is not much choice, power 143hp / 18.2kgm in the domestic car is something that can be quite frightening, and the original will with manual transmission, basically it is already hot topic invincible hand, there is another British regulatory P11 version with multi-point injection 150hp models, the original 0? 96km / h acceleration can be completed within nine seconds, Oh look within nine seconds, the terminal velocity is directly breakthrough 220km / h original bottom of the table.

But Charlie Horse factory equipped SR20DE have a common problem, that is, the flow of the oil pump is not enough, even if considerable attention to the oil quality, most owners will be in operation in the Persian burned 100,000 km encountered problems, but this engine is now very cheap , so we have to give up pieces directly for engine maintenance. And more owners will directly put SR20DET turbo engine, although power is quite full, but because of the heat that comes with conditions due to poor air is not cold, this part is made of aluminum or copper in addition to put tanks outside, with electronic fan and a single with a front fan to enhance cooling efficiency, a senior, said the owner of A chess addition, such Impreza GC8 fans also love flow Perak horse supplies, in addition to very strong suction, the design of the steel frame bracket, but also to avoid plastic often because of engine produced by high-temperature deformation of the stent.

After the original owners of small chess SR20DE engine damage Persia, directly put 210hp of SR20DET, basically engines also try to keep the surrounding perimeter, turbo also hidden in obscure location, but generally speaking, if the cost of simply replacing the word about SR20DE about 3 million, RB26 crankshaft so the owners are also less likely to replace damaged Persia.

As long as readers love modified cars should have heard how much "water injection" The system, BMW Ignition Coilswhich by definition is the water jet nozzle into the interior of the engine, thereby reducing the intake air temperature, intake air temperature is due to the decision engine output One of the important factors in performance, especially in the booster vehicle is more important, and the energy required for water molecules vaporized gasoline six times, the same cooling water is far greater than the effectiveness of environmental petrol, it can take away a lot of temperature, After ejecting the atomized mist of water sprayed into the cylinder, it is possible to effectively reduce the temperature within the cylinder, once the temperature is lowered, can effectively enhance the engine performance.

The car had only just visible in the modified water injection system, did not think the future will also appear in this higher-order performance BMW M4 GTS car, and the factory is also listed as a standard item. This parking order set higher than the M4 Coupe cars, the appearance is still M4 as the basic framework, but under the new front spoiler and rear wing and tail styling car may MotoGP Safety Car-M4 and the same, and the whole car pick lightweight design through aluminum doors and carbon fiber racing chair a way that will reduce vehicle weight to about 1400kg, compared to the general version of the M4 1572kg, the weight difference is quite obvious.

3.0L six-cylinder engine remains the twin-turbo configuration, but through the surrounding adjustment, the maximum output will exceed the general version of the M4 431hp and 450hp reach above the standard, and equipped first appeared in "Water Injection System" MotoGP Safety Car-M4 on the water injection system, the intake manifold built by three high pressure nozzles to precise electronic control system, the mixed liquid of alcohol and water formed, up to 10bar pressure is injected into the intake manifold, so not only can significantly reduce intake air temperature, cylinder can absorb heat, thereby reducing engine knocking conditions. In addition, the original also said the system can be further improved cylinder oxygen content and fuel efficiency, making the engine more smoothly operational efficiency, thereby extend the life of the internal components. And this car is expected to be officially released in August this year, listed by BMW factory can be possible for a glimpse of the water injection system design logic why, Seat 1.8 turbocharger as a reference during the installation of modified cars.

As equally exaggerated styling Subaru factory car, BMW Coilovers is used to create Subaru Super GT races in Japan to attend classes BRZ GT300 race car, this car to get very good results in the last race in eight stations have two stations to get the top two grades , which also won the fifth stop grouping single races rankings, will work with the group shot down numerous GT3 factory car, on behalf of its strength is indeed extraordinary. As for the engine is equipped with EJ20 system into a more stable, by strengthening the abdominal forged parts, so that it can output 350hp / 6000rpm, maximum performance output 45kgm / 4000rpm and with 1150kg vehicle weight with the six-speed sequential manual transmission plus six former AP / rear four-piston calipers and carbon-fiber clutch three-piece group, giving the car a pure athletic ability of the war.

Subaru BRZ GT300 exterior part of the use of wide-body appearance, the car body covered in response to aerodynamic design, a fighting force of the most tense BRZ factory car

Fengyun Subaru BRZ GT300 engine is equipped with the EJ20 system, and the relative position of the turbine engine and general commercial modified car is completely different in the cold water tank and then taken down V-shaped arrangement, mushroom head is mounted in the outlet has a carbon fiber guide intake kit inside.

Fengyun turbo IHI products for air intake diameter of 41.31mm visible blue throat is limited, Down Pipe is designed with dual jets, turbo suppliers turbo exhaust outlet and the outlet zone separates wastegate, to reduce high low speed when the discharge pressure.

Abdominal engine piston rod and has been replaced by STI can see the launch of forging parts.

An institution, turbocharger a survey found that more than eighty percent of women owners will be handed over to the car repair shop and beauty shop for cars, do not understand the relevant knowledge of vehicle maintenance and repair. Maintenance experts said, in fact, the female owner as long as we learn the recipe for car maintenance and repair "simple tricks", maintenance can become "experts", so not only can respond freely in the usual case of an emergency driving, and sometimes also to avoid unnecessary losses, and even save lives.

    Many female owners lack the basics of keeping a car, let repair people how to say when the repair is how to repair, often "disease as a sick, sick as a little ill." To avoid being taken in, as well as to safe driving, the female owner has Bubu have basic knowledge of car maintenance and repair.

Sanshui "means the water tank, battery water, glass (wiper) of water." Three oil "means oil, transmission fluid, brake fluid. Female owners are afraid of dirty, troublesome, do not want to open the hood, so can not accurately Learn car "Sanshui, three oil" situation.

    Experts give them: You can start from the most basic, such as learn to see the amount of engine oil, which is the most conventional and most simple check. Can be extracted in three minutes after the engine stalled the dipstick, wipe clean, and then insert the dipstick in situ, then remove the oil dipstick to see the plane, as long as the oil between the "F" or "L" can be. Check the brakes and brake fluid is relatively complicated, you can feel the handbrake pulled up sound is normal.

    As for the "Water" is relatively simple to check, open the hood you can see the glass water pipes, visible water level there is no problem. Water tank and battery is relatively complex, Vice tank level is generally between Full and Low. Of course, more need to focus on whether the leak was observed, if the tank is broken, there will be running water splashing into the sky, you can see traces of water in the bottom of the car. But the most important thing is to look at the water table, if the tank is broken, probably will first be reflected in the water table.

    Read "light language" on the dashboard warning lights are all important

    Small dashboard includes engine tachometer, speedometer, odometer, fuel gauge, water temperature gauge, and a variety of hundred kilometers fault indication. From the car dashboard can be read if the vehicle has a fault, you can identify problems and timely maintenance. Many female car owners may not like the dashboard, many people start the car for several years, in addition to the speedometer, but what brake lights, machine lamp, hand brake lights, etc. do not know where. And when the lights on the dashboard appear abnormal on what to do, when the dashboard warning lights, some owners may be because of some insignificant failure parking help, some owners even because they do not understand the "light language "and ignored, so missed a good opportunity to overhaul.

    Experts give them: read "light language" on the road again, the car will be more calm, so read dashboard "light language" is a required course for every female owner. If the dashboard lit up yellow fault light, it means the car is faulty, but the vehicle can still be used to a certain number of kilometers traveled in safe mode, in which case, the main contact female car repair shop. If the red light on the dashboard lit up, to the car parked in a safe place, it should not start the vehicle, call waiting service station can send someone to repair. Normally, you can see more of the female owner manual, understand the various indicator functions. Another view of the female owner of self-examination and repair weak, 240SX coilovers to prepare a variety of emergency service calls in the car.

The reason is not used for a long time skylights will be issued a harsh noise, it is because the rails retained too much dust and grit,turbocharger manufacturers and track severe lack of lubrication. Roof maintenance work we can complete on their own. We only need to fully open sunroof, wipe the dust and gravel on the roof rails with a clean soft cloth, choose no lubricant viscosity for easy absorption sunroof drive track for lubrication, and finally close the sunroof fully open repeated several times, and then Wipe off excess lubricant with a soft cloth. This simple routine maintenance is complete.

In everyday use, we need to pay attention to the following points:

1. For electric sunroof, in the bumpy road best not to fully open sunroof, otherwise it will cause too much vibration and slide sunroof caused by deformation between related components, and even damage to the motor.

2. Note the skylight waterproof. Sunroof sealing rubber ring seal, to pay attention to in the course of a ring of dust, especially after the winter or experienced long-haul, must be cleaned regularly with a dusting Shan. Also they must not under skylights have frozen the situation again forced open the sunroof, it will damage the sunroof motor. In a large sandstorm season, to be every two months with a clean sponge seals.

The vehicle parked in preparation for the long-term need to use talcum powder before thoroughly cleaned once a sunroof tracks, to avoid too long to show cause aging caused by a chemical reaction of seals in the air.

4. In the washing process, 200SX coilovers avoid using high-pressure water jet of water directly at the seals. This is not only easy to seal in the water column under high pressure deformation of the car but the water will damage the seals in a great extent.

Mercedes-Benz brand Babs Queen modified recently launched a modification works, modification of vehicles for the Mercedes-Benz SL63 AMG, this modification has been very obvious changes in appearance, Suzuki Connecting Rod becoming more impact. The biggest highlight is the increase in power, maximum power increase a staggering 230kW, which is what a powerful digital!

First, let's look at the appearance changes. The modification added to the appearance of a new sports package includes a new front surrounded by a new engine cover, rear diffuser and rear wing. Meanwhile, the modification also includes a sports exhaust system and 20-inch alloy wheels new.

In power, the 5.5 l V8 twin-turbo engine has been re-adjustment, the maximum power to the 625kW, maximum torque of 1450Nm. Maybe you feel this figure is not very surprised, but when you learn to re-adjust after power than the driving force behind the promotion of 230kW and 650Nm, you will be surprised. It is reported that the modified model 0-100 km / h requires only 4.3 seconds, Citroen 1.6 Turbocharger top speed is limited to 250 km / h.

If the engine appears daily traffic due to poor heat-induced failures are more accidents.

Automotive engine cooling and air-conditioning system is bad, Honda Connecting Rod causing the water temperature is too high will appear the following symptoms:

1. poor traffic - traffic jams or prolonged idling, the engine temperature is too high table displays, electronic fan speed gear long working hours, the engine noise increases, the temperature is too high off the air conditioning failure is most obvious.

2. In the open air when the temperature is too high, unstable idle speed floating too large, hard acceleration weakness, abnormal sound engine.

3. hot car stalled ten minutes, is not easy when you start the car; when hot cars traveling sometimes automatically turn off.

The cold air conditioning and refrigeration temperatures cool car, hot car air conditioning cooling effect is not obvious; and a greater resonance in the air conditioning system hum.

5. hot car idling, the air conditioning compressor clutch suck off frequently, even disconnected, resulting in hot car air conditioner is not cooling.

Automotive engine water temperature is too high Solution:

1. hot car, return pipe backwater Check antifreeze top of the storage tank, if poor backwater or blockage will cause the water temperature is too high.

Reminder: Do not blindly in the maintenance and dismantled for parts.

2. Check the dust between the condenser and the tank is too much, thoroughly washed with high-pressure gas tank and condenser ensure good heat dissipation.

Reminder: the usual attention to wipe the dust between the condenser and the tank.

3. In the hot car, check the temperature difference between the tank and down pipes, if the temperature difference is too big, you need to check the thermostat opening and the speed of the pump if there is a fault throw switch.

Reminder: the temperature difference between the tank and down pipes can not be too large.

4. Due to the addition and replacement of antifreeze is not standardized, it will cause the engine clogging waterways and water tanks in advance, appear high temperature phenomenon. Antifreeze replaced every two years, must be used in the replacement and original accessories added.

Reminder: the engine cooling system after adding water, or adding antifreeze concentration exceeds by more than 60%, will cause the water temperature is too high.

5. The air conditioning system high side high pressure is too high; air conditioning refrigerant or air conditioning and refrigeration lubricant filling too; internal self-debugging features self-adjusting air conditioning compressor malfunction, causing high pressure is too high; there is air-conditioning condenser blockage, above will increase the load on the engine failure, Citroen Berlingo Turbocharger the consumption of the cooling system thermal performance, high temperature guide system failure.

Reminder: air conditioning refrigerant filling too little or too much, will reduce the cooling effect.

Mention car maintenance, many owners think of the engine and tires, and a small wheel let us completely ignored, Peugeot Crankshaftbut we want to know the quality of the relationship between the wheels of the quality of car tires, which relates to the safety of our lives , so that the small wheels also need our care, then if improper maintenance because our wheels appeared damaged, how to fix what we want? Following editing to tell you about.

Note wheels when routine maintenance:

1, when the high temperature wheel, should be allowed to cool before cleaning, do not use cold water to wash; otherwise cause damage to alloy wheels, brake discs and even affect the braking effect of deformation. In addition, at high temperatures with a detergent to clean aluminum alloy wheels station, hub surface will react, dull, affect the appearance.

2, when the asphalt stained difficult to remove the hub, to no avail if the general cleaning agents that can be used to try to clear brush, but do not use strong brush, especially iron brush to avoid damage to the surface of the hub. Some experts have introduced a clear asphalt recipe: the selection of medicinal "active oil" rubbed, get unexpected results, the owner may wish to try.

Minor scratches can repair itself:

The first step: the hub for clean up. We can use the paint diluent, wipe around the scars to remove dirt. Scratching the deepest part of the dirt is difficult to remove, when available toothpick will get it completely clean. In the clean-up time, in order to prevent the mistake irrelevant by painting the tape affixed to the best carefully around the scar.

Step two: the owners tidy hair nib in damage to the hub where painted varnish, lacquer and then dried, smeared a little bulge in some owners to facilitate observation.

Step Three: Once the modified vehicle to paint is completely dry, dipped in soapy water with a water-resistant paper, smoothing the surface. Then use the mixture clashes bright, waxing last resort.

Step four: the owner if found to have deep scars on the wheels, but must observe the metal surface is exposed, Ford 1.6 Turbochargerif not see the metal surface will not rust, can concentrate coated with varnish. Place up a little bit with the pen, and then wait for the paint to dry completely. If exposed metal, and it is best to replace it.