Mercedes-Benz brand Babs Queen modified recently launched a modification works, modification of vehicles for the Mercedes-Benz SL63 AMG, this modification has been very obvious changes in appearance, Suzuki Connecting Rod becoming more impact. The biggest highlight is the increase in power, maximum power increase a staggering 230kW, which is what a powerful digital!

First, let's look at the appearance changes. The modification added to the appearance of a new sports package includes a new front surrounded by a new engine cover, rear diffuser and rear wing. Meanwhile, the modification also includes a sports exhaust system and 20-inch alloy wheels new.

In power, the 5.5 l V8 twin-turbo engine has been re-adjustment, the maximum power to the 625kW, maximum torque of 1450Nm. Maybe you feel this figure is not very surprised, but when you learn to re-adjust after power than the driving force behind the promotion of 230kW and 650Nm, you will be surprised. It is reported that the modified model 0-100 km / h requires only 4.3 seconds, Citroen 1.6 Turbocharger top speed is limited to 250 km / h.

If the engine appears daily traffic due to poor heat-induced failures are more accidents.

Automotive engine cooling and air-conditioning system is bad, Honda Connecting Rod causing the water temperature is too high will appear the following symptoms:

1. poor traffic - traffic jams or prolonged idling, the engine temperature is too high table displays, electronic fan speed gear long working hours, the engine noise increases, the temperature is too high off the air conditioning failure is most obvious.

2. In the open air when the temperature is too high, unstable idle speed floating too large, hard acceleration weakness, abnormal sound engine.

3. hot car stalled ten minutes, is not easy when you start the car; when hot cars traveling sometimes automatically turn off.

The cold air conditioning and refrigeration temperatures cool car, hot car air conditioning cooling effect is not obvious; and a greater resonance in the air conditioning system hum.

5. hot car idling, the air conditioning compressor clutch suck off frequently, even disconnected, resulting in hot car air conditioner is not cooling.

Automotive engine water temperature is too high Solution:

1. hot car, return pipe backwater Check antifreeze top of the storage tank, if poor backwater or blockage will cause the water temperature is too high.

Reminder: Do not blindly in the maintenance and dismantled for parts.

2. Check the dust between the condenser and the tank is too much, thoroughly washed with high-pressure gas tank and condenser ensure good heat dissipation.

Reminder: the usual attention to wipe the dust between the condenser and the tank.

3. In the hot car, check the temperature difference between the tank and down pipes, if the temperature difference is too big, you need to check the thermostat opening and the speed of the pump if there is a fault throw switch.

Reminder: the temperature difference between the tank and down pipes can not be too large.

4. Due to the addition and replacement of antifreeze is not standardized, it will cause the engine clogging waterways and water tanks in advance, appear high temperature phenomenon. Antifreeze replaced every two years, must be used in the replacement and original accessories added.

Reminder: the engine cooling system after adding water, or adding antifreeze concentration exceeds by more than 60%, will cause the water temperature is too high.

5. The air conditioning system high side high pressure is too high; air conditioning refrigerant or air conditioning and refrigeration lubricant filling too; internal self-debugging features self-adjusting air conditioning compressor malfunction, causing high pressure is too high; there is air-conditioning condenser blockage, above will increase the load on the engine failure, Citroen Berlingo Turbocharger the consumption of the cooling system thermal performance, high temperature guide system failure.

Reminder: air conditioning refrigerant filling too little or too much, will reduce the cooling effect.

Mention car maintenance, many owners think of the engine and tires, and a small wheel let us completely ignored, Peugeot Crankshaftbut we want to know the quality of the relationship between the wheels of the quality of car tires, which relates to the safety of our lives , so that the small wheels also need our care, then if improper maintenance because our wheels appeared damaged, how to fix what we want? Following editing to tell you about.

Note wheels when routine maintenance:

1, when the high temperature wheel, should be allowed to cool before cleaning, do not use cold water to wash; otherwise cause damage to alloy wheels, brake discs and even affect the braking effect of deformation. In addition, at high temperatures with a detergent to clean aluminum alloy wheels station, hub surface will react, dull, affect the appearance.

2, when the asphalt stained difficult to remove the hub, to no avail if the general cleaning agents that can be used to try to clear brush, but do not use strong brush, especially iron brush to avoid damage to the surface of the hub. Some experts have introduced a clear asphalt recipe: the selection of medicinal "active oil" rubbed, get unexpected results, the owner may wish to try.

Minor scratches can repair itself:

The first step: the hub for clean up. We can use the paint diluent, wipe around the scars to remove dirt. Scratching the deepest part of the dirt is difficult to remove, when available toothpick will get it completely clean. In the clean-up time, in order to prevent the mistake irrelevant by painting the tape affixed to the best carefully around the scar.

Step two: the owners tidy hair nib in damage to the hub where painted varnish, lacquer and then dried, smeared a little bulge in some owners to facilitate observation.

Step Three: Once the modified vehicle to paint is completely dry, dipped in soapy water with a water-resistant paper, smoothing the surface. Then use the mixture clashes bright, waxing last resort.

Step four: the owner if found to have deep scars on the wheels, but must observe the metal surface is exposed, Ford 1.6 Turbochargerif not see the metal surface will not rust, can concentrate coated with varnish. Place up a little bit with the pen, and then wait for the paint to dry completely. If exposed metal, and it is best to replace it.

Mitsubishi EVO enough to have more than ten years, Mitsubishi Crankshaft and now has become one of the most typical EVO street ran reliably manipulate won many people's favorite. From the earliest to the present EVO.x EVO.i can say it in a step by step progress. Today, small as we bring this modification EVO, let's take a look at this legendary race born with Gun Knight descent.

Retro brown dress gives a pleasant feeling in the morning prairie, sharp headlights so that the whole car has a soul. Surrounded by large wide-body kit to make it look very solid. Machine lid above the mesh opening to provide a reliable heat dissipation, grille specially customized to achieve the air kit features. Like a shovel like a huge tail fin uphold the EVO typical pedigree generations. Bright silver wheels gleaming, beautiful green calipers equipment upgrade it further. Stocky tail plus single-sided exhaust out of the barrel, Mini 1.6 Turbocharger it looks so bluffing. The overall look down on the battlefield like a knight in on standby with.

German tuning firm Wimmer tentacles of a thoroughbred racetrack machine, impreza turbocharger KTM X-Bow, it's 2.0T engine upgrade to 486 horsepower.

As a very popular track car, X-Bow was originally planned 500 / year production has more than doubled. Now Wimmer With its unique ECU tuning in terms of skill, will be the most docile of X-Bow GT models into the most violent, the maximum power increased from 286 horsepower jumped 200 horsepower.

Wimmer has not announced the acceleration data changes after upgrading, can be said to control such a small body of high-powered car has been very easy. If you can manage around 486 hp X-Bow expert, must tell us.

German tuning firm Wimmer tentacles of a thoroughbred racetrack machine, impreza turbocharger KTM X-Bow, it's 2.0T engine upgrade to 486 horsepower.

As a very popular track car, X-Bow was originally planned 500 / year production has more than doubled. Now Wimmer With its unique ECU tuning in terms of skill, will be the most docile of X-Bow GT models into the most violent, the maximum power increased from 286 horsepower jumped 200 horsepower.

Wimmer has not announced the acceleration data changes after upgrading, can be said to control such a small body of high-powered car has been very easy. If you can manage around 486 hp X-Bow expert, must tell us.

First, the engine will not start every morning when you're in the car, ready to leave, Peugeot Crankshaft they found the engine fails to start, which is something very very upset. But sometimes, the engine can not be started, but because of some small problems caused if you understand these reasons, we can solve the problem as soon as possible. First check distributor, spark plugs, power lines, etc., etc. Is it because the car rain moisture, and if so, can the damp parts dry, then launch. Second, check the spark plug is damaged, if damaged, can be as long as the replacement of the fire plug. Third, check the battery voltage is adequate. Sometimes, parking lights forget, a long time, you may run out of power. If so, the car linked to the second block, foot clutch, drag car, when traveling to a certain speed, release the clutch, twist the ignition switch, the car will be able to naturally start, if there is a battery problem, this method can not be work.

Second, turn off the engine when the shift marching shift, if the operating specifications, but flameout phenomenon occurs, you need to check the following problems: First look at the stability of the idle, idle speed is too low, or if the unstable idle idling low, as long as the idle adjustment to normal speed can be. But also to tighten the idle shut-off valves, plug tight. Secondly, if the normal idle speed, it may be clogged oil separator is required to repair station specializing in cleaning oil separator.

Third, when a high-speed car steering wheel tremors occur with instability at high speeds or when traveling at a high speed, swing, and even the steering wheel shake, the reasons for this situation are the following:

A wheel alignment angle misalignment, excessive toe.

2, the front tire pressure is too low or tire repair and other reasons due to start imbalance.

3, the front tire spokes deform or unequal number of bolts.

4, transmission parts installed loose.

5, the drive shaft is bent, the power imbalance, the front axle deformation.

6-speed oscillation damper failure, there are two cases, one with improved speed runout getting intense, two appeared at a high speed runout, and cause the steering wheel shake. You can put up to the drive axle, front safety plug stopper block, start the engine and gradually shift into high gear, the drive wheel shimmy to reach the final speed test. If at this time the body and the steering wheel shakes, for the transmission caused by runout.

Because the front wheel axle in a quiescent state, if runout try to reach the final speed, the car does not appear jitter, the runout of the reason is the existence of a fault before the bridge part of the car; check the front wheel angle and the toe meets the requirements, such as misalignment should be adjusted; erected front axle wheels turn test, check wheel balancing and tire is deformed situation is too big. If necessary, change the wheels good comparison test; check the front axle, frame is deformed, check whether the shaft is bent driveshaft balancing conditions should be doing.

Fourth, the steering heavy heavy steering many reasons, hilux turbocharger but usually there are the following:

A tire pressure inadequate, particularly lack of front wheel pressure, steering will be more difficult.

2, the power steering fluid deficiency, add power steering fluid.

3, wheel positioning, the need for wheel alignment test.

Fifth, when driving wandering checking deviation, usually when driving, straighten the steering wheel, then release the steering wheel travel, to see if the car straight. If you do not walk a straight line, that is deviation. First deviation may be inconsistent because about tire pressure caused by insufficient demand for tires inflated. Secondly, the front wheel alignment may be allowed. Camber, kingpin angle or kingpin interior angles ranging from small or negative toe toe will cause deviation, must go to a professional service station testing.

Skoda Octavia as Shanghai Volkswagen Skoda brand's first car, turbocharger the advanced models synchronized with Europe, and a lot of localization improvements according to the situation in China, the success in the domestic market June 6, 2007. Octavia, Skoda adhering to the long history of centuries and repairer of the Volkswagen Group's leading repairer technology, bringing together a number of leading automotive technology and equipment, the same level as one of China's most competitive car models.

When it comes to exterior design, the Skoda Octavia is definitely a faction in the compact car. Most models are designed to develop in the direction toward a smooth fashion, while Octavia Quefei go this road. Now some retro look makes the Octavia more distinctive style, mature attitude can easily be recognized by users over the age of 30, which also makes it the target audience and the speed with not too much overlap Teng platforms. Dynamic, Octavia equipped 2.0T turbocharged engine, maximum power of 147KW maximum torque of 280NM.

ECU programming tailored for personal data, Mazda Miata Coilovers providing ample power, superb driving pleasure. This car through OBD read and write data, the've done very much, the operation is simple and convenient. OAK headquarters to send data to an hour after the data is written back to the road again: the turbine does not start, speed obviously have traffic light, sound, vigorous, and shoved hard acceleration when tire slippage, ESP light flash next. Explosive or adjust quite perfect. After surging more forceful power segment. Owners very satisfied, beyond his expected results. Enhance 40PS 80NM.

BMW Z4 shape design stylized, most styles of design or from its profile, looks slightly exaggerated in the engine compartment so that the cab visually move a lot, it also allows Z4 have more retro charm. Miata Coilovers Striking BMW logo also appeared on the sides of the body, regardless of any angle we can feel this car brand's extraordinary. Smooth lines through the front, until the rear is still spare no effort to express a strong surge of sporty.

The rear is short, but at the end you can still clearly see the BMW models pouty style habits. Two Z4 is the product of 10 early, with the 3.0T N54 engine, twin-turbo, this engine upgrade potential is very large, the operation is very simple, just use CMD directly through the OBD port to complete the operation. BMW models are rather long operating time point. Need more than one hour to complete the read data out, and then sent to the Stephen headquarters packed modified. Let us now take a modified procedure stunning lines under the Z4. The two front double door BMW Z4 coupe albeit quietly parked here, but the whole body exudes charm is one car per person are irresistible. Reveals a stylish and retro, rebellious but orthodox dual personality, Z4 is fully capable seize every man's heart through his side.

After two hours, Stephen nearly ECU modification program to create high-performance test with a good, professional engineers, skilled write Enter the program, this time be sure to keep the vehicle is fully charged, and the network is stable, these details are affected upgrade of successes and failures, about an hour later, two cars are the successful completion of the upgrade. Enhance the strong momentum 64pk, 100N.M by testing the car. Through testing, the first foot throttle can feel strengthened explosive acceleration is linear, push back very strong. After several hundred kilometers acceleration time is measured in the range of 4.6s to 4.7s, half a second faster than the official 5.1s. Enhance the effect is very significant, turbocharger uk two owners of this effect is never praise, upgrade successfully completed.

Lights modification has been modified community popular topic. Lights nothing more than modified to three points: 1, to see the dark road, Ford Turbocharger improved nighttime driving safety, reduce night driving difficult. 2, increase lamp life and reduces lamp failure. 3, make your car more cool personality, unique. I think most riders heart converted third point is particularly valued.

The halogen bulbs replaced xenon bulbs
Advantages: Because the market has been launched adaptation H7, H4, H3, H1, HB3, HB4 halogen bulbs such as xenon bulb, so almost all of the models can be applied.
Disadvantages: a serious negative impact on the one hand due to xenon bulbs and halogen bulbs original size, dimensions are different, the light-emitting part of the inevitable departure from the focus position, so that the lights appear not concentrating, without proper beam function, even will lead blazing car will increase the chance of a hundredfold. On the other hand as a result of changes to the original car circuit, once the product quality problems, is likely to cause a short circuit fire.

Replace the headlight assembly
Pros: This modified approach mainly Maehara supporting xenon headlights, Mazda 1.6 Turbocharger xenon light source that is equipped with light and reflector designed specifically for, and thus become an ideal retrofit methods.
Cons: expensive.

Power conversion is a systematic project, Peugeot Turbocharger the project owners are more experienced. Whether it is improving or upgrading the original vehicle dynamic performance, the owner must first have their own expertise. We now see the most improvement in power conversion is to install the tail, the tail of the role is to improve the aerodynamic performance, aerodynamics have been more used in aerospace manufacturing, but the vehicle dynamic performance, high-speed change of the roof, sides when driving, site speed airflow direction, thereby improving airflow through efficiency, reduce drag and increase vehicle stability, and therefore there is another one called tail spoiler. The implication is that for turbulence interference.
In addition, both the initial conversion of the owners want to improve dynamic performance, appearance and despotic want, you can start with the wheels, tail, playing disc brake slowly, until the right to know when you have a real power system, and then gradually reach the turbine, mushroom head more complex power, damping system and so on modification. But one thing to remember, and video, interior and exterior modifications compared to the power conversion system upgrade is more complex, more systemic, such as a smaller displacement modified hatchback larger than the flat tire after increasing the number of vehicle stability, but will also bring increased fuel consumption, Mini Cooper Turbocharger Jiaoruan other phenomena.