In simple terms, Coilover Suspension Kit car modification can be divided into exterior modifications, interior conversion, power conversion, modification and manipulation of audio conversion. Results of a modified car represents the owner's taste and his views on driving. When human life into the e era, car modification also adds a new element: intelligence. However, in many retrofit projects, the most exciting is the mechanical modifications, it is the owner of the car to be developed imagination and infinite potential perfect combination together. The main mechanical structure of an automobile can be broadly divided into: body, interior equipment, engine power, gearbox transmission, suspension, brakes and electronic control systems. This is the middle if any one has been modified, the car itself will immediately feel the impact of change. Here with HC Xiaobian look at the most important car modified three large content of it.

Exterior modifications

Appearance of the body modification has been occupied a very important position, the general appearance of the modifications include stickers, body painting, car sticker, around the bar, surrounded by large, high tail, opening the hood, rain shield window, HID xenon headlights, front headlight decorative panels, front and rear lens, lower body and so on.

Changes in body appearance fastest and most convenient way is to install aerodynamic package. The so-called aerodynamic package is commonly known as big bag, basically contains the grille, side spoilers (side skirts), after scrambling Flow surround and rear (tail), and sometimes we will see in the original insurance bars will install a spoiler, the general is called chin: if there is no insurance to replace the front and rear bars, just install the chin, it was also called packets. BMW E36 Camber Plates In addition to installation of aerodynamic vehicle can make more interesting to watch, as well as the more sporty, the most important thing is to have good performance improvement. Aerodynamic package installation does not make the vehicle run faster, strictly speaking, a good kit will usually reduce the speed, can make the car more stable performance.

Power conversion

Like the human heart, as is the heart of the car engine, which is the most important part of the entire vehicle. And it is also the most troublesome refit its main modification is to increase its power output, conversion methods are: to increase the bore, increasing the compression ratio, Cadogan valve, naturally aspirated to turbo etc., but must note that, modified engine is quite dangerous, a careless engine will be damaged, and even lead to serious accidents.

Intake System

Engine work requires a lot of air, the air entering the engine through the air filter first, which is the most important part of the intake system, currently most of the original configuration are disposable paper filter. Modified products are made with a special chemical fiber, its biggest advantage is in the filter clean air into the combustion chamber while the air flow velocity increased by more than 30%, so that the fuel burn more fully, more efficient units, engine the performance of the natural well.

Ignition system

Ignition system is another element of the engine by the spark plugs and ignition wires together constitute the original configuration group are single harness, by sex and by the amount of voltage and current are not satisfactory.

FireWire high-voltage conversion with multiple sets of harnesses and high conductivity characteristics of the ignition coil can generate a lot of timely transfer to the spark plugs. Spark plug ignition system is the end of the group, using the electrode to produce oil and gas to ignite sparks mixed, complete combustion, push the piston work. The original configuration and FireWire, are to reduce costs and make the minimum configuration. If you replace the spark line owners and spark plugs, throttle will make the car hard, start fast, sharp acceleration.

Exhaust System

Exhaust performance is directly related to engine performance of the pros and cons. An increase in the intake, combustion intact, while the need to strengthen the exhaust efficiency, high-performance exhaust pipes and mufflers became the owner of the power to pursue the goal.